- Replacement bar donuts for cobrafist pogies
All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm
- Chromoly steel - CNC fabrication - 1.29" x 24tpi left hand thread
Snap-on brake cable guides for bikes that don't have any. - Steel cable housing guide for 1-1/8" top tubes - Snaps on; no bolts - Set of 3 clamps
Tired of losing your bar end plugs? Seeking a more secure solution that also venerates your favorite little bike company from Minneapolis? Well, boy howdy do we have just the thing...
The All-City Master Dropout is a sliding dropout system consisting of replaceable dropout plates and fixing hardware. Designed for use with 12mm thru-axles and flat-mount brakes, it is compatible only with select All-City models. - Allows riders to convert from a geared to single-speed setup or vice-versa - Compatible only with select All-City models - No additional chain tension adjustment required - Non-Drive Side, use with multi-speed and single-speed setups - Plate and fixing hardware included - Compatible with Flat Mount disc brakes
All-City Singlespeed Disc Brake Adaptor
Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp. - Laser-etched All-City logo - Aluminum body with stainless steel hardware
- 90 degree
- Noodle/Boot completely seal brake cable, upgrades most linear brakes
- Includes stainless bolts - Fits 160mm front and 140mm rear rotors
Essential parts to properly service and maintain all Avid CODE brakes. - Replacement parts for 2011-2016 CODE brakes - Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
- Ultralight, CNC-machined 6061 aluminum spacers for fine-tuning stem height - Includes one each: 3, 5, 10mm spacers and two each: 1mm spacers
Box Two Quick Release Seat Clamps are cold-forged, and CNC machined from 6061-T6 aluminum alloy. Weighing in at just 27 grams/0.95 ounces in the 31.8 size, they are as lightweight as tough. The head of the quick-release lever and the face of the clamp are given a proprietary low-friction surface treatment that ensures smooth lever action for the life of the clamp without the need for a bushing. Meets or exceeds ENM standards.
Cold-forged and CNC machined from 6061-T6 aluminum alloy, Box One Fixed Seat Clamps are tough, lightweight, and exceptionally good looking. Featuring titanium hardware and laser-etched graphics, Box One Fixed Seat Clamps are available in anodized black, blue, red, and silver.
- CNC-machined 6061-T6 aluminum with titanium hardware - Zero-friction cam surface treatment ensures smooth lever action - 27g
Box One 7075 Alloy Chainring bolt kits include five 8.5-mm front bolts, five 6-mm front bolts, and five 5-mm rear nuts, so they will fit just about any chainring/crank combination, including those with threaded holes.
$16.00 - $20.00
Benno replacement derailleur hangers.
Benno replacement Seat Collar for Boost E frames.
Our clever Splits clamp attaches our Triggy directly to the handlebar. Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on! A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look. By the way: SRAM shifter triggers can also also be attached to the handlebars using our Splits clamp.
Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec II brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers with Shimano brakes. Our BikeYoke I-Spec II adapters are available as "left" or "right" for Shimano brake levers but you can also flip sides if you prefer a more inward or outward remote position: Compatible brakes: - Deore BL-M6000 - Deore BL-501 - SLX BL-M7000 - XT BL-M8000/8020 - XTR BL-M 9000/9020 Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS
Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec B brake and saves an extra clamp on the handlebars. They can also be used to mate SRAM triggers or other remotes with Shimano brakes. Left and right + flip-flop compatible. Compatible brakes: - SLX BL-M675-B - XT BL-M785-B - Zee BL-M640-B - Saint BL-M820-B Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS
Who does not love a nicely cleaned up cockpit? This neatly CNC-machined piece of black anodized and laser engraved 6061-T6 Aluminum attaches all Triggys directly to a Shimano I-Spec EV brake and saves an extra clamp on the handlebars. You can also use it to mate SRAM triggers or other remotes with with your I-Spec EV Shimano brake. Our BikeYoke I-Spec EV adapters are available as "left" or "right" side for Shimano brake levers and you can also flip sides if you prefer a certain more inward or outward remote position: Compatible brakes: - Deore BL-M6100/6120 - SLX BL-M7100/7120 - XT BL-M8100/8120 - XTR BL-M9100/9120 Compatible remotes/shift levers: - BikeYoke Triggy serie - OneUp Remote V2 - Specialized Command Post SLR - Race Race Remote Turbine R - SRAM EX1 - SRAM NX EAGLE - SRAM GX / GX EAGLE / GX EAGLE AXS - SRAM X1 - SRAM X01 / X01 EAGLE / X01 EAGLE AXS - SRAM XX1 / XX1 EAGLE / X01 EAGLE AXS - Rock Shox Reverb AXS
We never just want to make something, that´s already there. We want to make something different, something better. Featuring a classy and costly CNC-Finish and a wonderful Titanium bolt, Squeezy is not just light with 7.9g @ 34.9/35mm. Unlike other seat clamps, Squeezy has a collar-less design. Collars are basically just a installation aid, to prevent the clamp from sliding down the seat tube, but in fact they locally stiffen up the clamp and hinder it from distributing the clamping force evenly. Squeezy acts like a thin metal band, that perfectly snuggles around the circumference of your seat tube and smoothly secures your seatpost in place. Compact design and the Titanium Torx T-25 bolt placed as close to the seat tube as possible allow even distribution of loads and dropper posts in particular can benefit greatly from smooth load distribution. 3 "Slip-Stopps" prevent Squeezy sliding down the seat tube during installation. Squeezy is available in various diameters to fit the most common seat-tubes. Please note, that this dimension refers to the seat-tube outer diameter and NOT to the seatpost specification. - 31.8mm - 34.9/35mm Features - extremely low weight: 7g (31.8mm) - material: Al-7075-T6, fine-feed CNC finish - collar-less design for more even clamping force distribution - Ti-6Al-4V titanium-clamping bolts Torx T-25 drive (please note, that Squeezies from first batch had T-20 bolts, but we figured, that was not a very smart choice) - "Slip-Stopp" installation aids
Shifty is a small but extremely effective little device for your SRAM 1x11 or 1x12 rear derailleur. Particularly when riding in wet and muddy conditions, we found out, that SRAM rear derailleurs lack shifting accuracy, due to the fact that the original pulley rotates with its plastic body on a steel axle. The pulley experiences extensive friction, when dirt, water or mud come into play and causes lack of precision or even "ghost-shifting", because the rear derailleur is not able to react smoothly to the trigger´s action, since the shifting cable can not move freely. BikeYoke Shifty features an anodized 6061-T6 aluminum body, which encloses a stainless steel bearing for ultra low friction, even when playing in the dirt. Weight of Shifty pulley: 6.3g Every Shifty now comes with a bolt and axle kit, which allows installation of our Shifty on the popular GX Eagle and NX Eagle rear derailleurs, which normally use a riveted connection, instead of the bolt-on solution of the higher spec derailleurs. You just need to remove the original rivet and replace them with our bolt and axle. Shifty fits following rear derailleurs: - XX1 - XX1 Eagle - X01 - X01 Eagle - X01 DH - X1 - GX1 - GX Eagle* - EX1 - NX* - NX Eagle* For rear derailleurs marked with *, you will need to remove the original rivet and replace it with the bolt and axle from the BikeYoke Shifty kit. 1 Set Shifty includes: - 1x Shifty pulley - 6061-T6 aluminium, anodized - 1x axle - 1x bolt
Triggy Alpha - The name speaks for itself - the new pack leader of dropper remotes. Since the beginning our Triggy has proven to be a favourite among many many pro riders and testers but with Triggy Alpha we have now set the bar even higher and we confidently say: There is no better remote on the market. The video is pretty much explaining very well what makes Triggy Alpha stand out amongst others: - Ball bearing on the paddle - Angle-adjustable paddle - Black anodized aluminum body and paddle with laser engraved finish - 2 available paddle lengths for crisp or soft dropper engagement - 2 mounting holes - Integrated cable tensioner - Direct mount for almost any brake available (see mounting options) - New cable clamping for universal dropper compatibility - Extremely low weight: 32g/34g (short/long) - Maximum cable pull: 11 mm The short version mimics our proven original Triggy paddle geometry. The long variant features a 7mm longer paddle and reduces the required forces by about 15%. Triggy Alpha is compatible with any commonly available aftermarket cable-actuated dropper post on the market. 1 set Triggy Alpha includes: - 1x Triggy Alpha remote (short or long) - 1x shift cable - 1x wire endcap - 1x BikeYoke Splits Clamp or I-Spec Adapter (optional)
Choose our 2X remote for your dropper if you don't have enough space for a Triggy under your left side handle bar, for example if you are still running 2-by or 3-by shifting with front derailleur or if you have anoter remote for suspension or e-support. It also features a hinged clamp, that allows snapping your remote onto your handlebars without having to take off grips or brake levers. The clamp is made from a high-tech plastic compound and aluminium. The paddle itself is made from 6061-T6 aluminum, black anodized and finished with a dark anodized BikeYoke logo. Allowing a maximum of 10mm cable pull our 2X is compatible with any known dropper post on the market. The cable/wire is clamped via screw on the lever itself.
Many dropper posts feature remotes, that do not live up to a standard, that you would expect, when paying a lot of money for a dropper post. Even the most expensive droppers out there often come with remotes, that have ridiculous play, are made from plastic, bulky, heavy, or just do not function as they could. We put a lot of time and testing into the design of a remote lever that fulfils everything we want to see in a remote for dropper posts and since its introduction it has proven to be a favourite of many pro-riders and testers. Features: - Super lightweight (24g without clamp) - Made from 6061-T6 aluminium with a CNC finish, black anodized and laser engraved - You can (but don´t have to) bolt it directly to the most common brakes without an extra clamp - Exceptional finish and touch - Individual mounting points to adjust position - Integrated cable tensioner - 12.5 mm of maximum cable pull 1 set Triggy includes: - Remote lever unit (black anodized and laser engraved aluminum body and lever with cable tension adjuster) - Shift cable - Shift cable endcap - 1x "Splits" clamp or I-Spec adapter (optional)
- Soft foam grip donuts prevent thumb blisters from riding gloveless - Intended for use with flanged BMX grips to prevent rubbing and irritation
- Allows the use of two separate cables running from detangler to brake for more precise adjustment and better feel - Attaches to rear cable guide and routes two cables around seat post
Page 1 of 42 Next page