Fenders

A quick and easy clip-on fender designed to work with the Trek Blendr Saddle Bag and Blendr saddle accessory mounts. The Blendr Fendr clips onto rear saddle mounts in seconds to prevent water and road kick-up from getting you dirty. Quick and easy installation and removal keep you ready to ride no matter the weather. Plus, you can easily mount a rear light to keep you seen. Details: - Connects to the Blendr Saddle Bag mount and Blendr Saddle Accessory mount - Lightweight plastic keeps your backside dry with almost no weight penalty - Integrated light mount makes it easy to quickly add a fender and rear light - Fits into a back jersey pocket or easily into a bag - Compatible with all wheel and tire sizes for road, gravel, and commuter bikes

- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc. - Fits a maximum tyre width up to 38mm. - It is the ideal companion to our S-BLADE rear mudguard. - Its smart, double hinged quick release fitting system also fits aero forks. - Paintwork protection film for the frame is included.

The Shockblade 26/27.5-inch is a clip on front, high-quality 2-component fender for mounting on the fork of 26-inch and 27.5-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 26-inch and 27.5-inch wheel compatible

The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber - Weight: 580g - Max. outer diameter: 35mm - Wheel size: 27.5" (650B), 28" - Tire width: 52mm - Length, front fender: 680mm - Length, rear fender: 870mm

The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible

Meet the Mucky Nutz MugGuard... our super, snazzy, award-winning mudguard for mountain bikes, made in the UK from 100% recycled plastic.

Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations. - A low-profile, easy-install fender that keeps riders clean in various conditions - Fits wide range of wheel sizes - Tool-free installation - Zip ties not included. Color zip tie options available through Problem Solvers.

The Mudguard fender mounts easily and cleanly to your fork; a direct-mount design eliminates the need for fork-scratching zip ties and ensures your line of sight stays clear. It also reduces maintenance downtime by minimizing the amount of debris hitting your stanchions and fork seals. - Direct-mount design, no zip ties needed - Fits FOX 36 - 38 forks

Add fenders to your bike to show mud and debris who's boss. Functional. Fashionable. Fenders. No one wants that wet stripe on their back. Accessorize your ride with some fenders and keep yourself dry while you're at it. From subtle to chic, there's a pair for everyone. Product details: - Includes front and rear full-length fenders - Designed for use on Cruiser Go! and Townie Go! 7D e-bike models - Protects against pesky mud and splashes - Will not fit on other bike models - Compatible with Electra light kit - Mounting hardware included - Mounting location: Front and Rear - Attachment: Bolt-on - Material: Aluminum

A pair of Electra's Townie Aluminum Fenders on your ride will let you pedal even in less-than-ideal conditions. They're made from durable, low-maintenance aluminum and offer full coverage so you'll arrive squeaky clean. All mounting hardware is included for quick and easy installation.

These steel fenders offer tire coverage that is durable with a timeless aesthetic. - The crescent full-coverage design offers a closer fit around the tire - Made in the USA

Tacky trails and damp roads, they're what dreams are made of. That doesn't mean we want our faces plastered with the muck that comes along with them. Using nothing more than a handful of zip ties, WTB's minimalistic mud guard attaches to your fork in less than a minute to keep your vision free of mud and focused on the turn ahead.

These fenders feature a classic, fluted profile and are highly polished. They're 63mm wide, designed for 700c wheels, and work with tires up to 55mm wide - the sweet spot for touring and city bikes. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Rear fender is crimped just above the chainstay mount to allow use of a front derailleur - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build. Watch this video and read the instructions to make sure your frame and fork has the correct mounts and hardware needed. If you need additional hardware, check out this page.

These fenders feature a classic hammered pattern and are available in high polished silver and smooth Noir. They're 45mm wide, designed for 700c and 27" wheels, and work with tires up to 35mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build.

These fenders feature an art-deco, zeppelin profile and are available in high polished silver and smooth Noir. They're 52mm wide for 650b wheels with tires up to 44mm wide. They are 52mm wide for 700c and 27" wheels, and work with tires up to 42mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed - eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build. Read the instructions to make sure your frame and fork has the correct mounts and hardware needed.

Keep yourself and your gear clean and dry with a stylish fender. Original equipment replacement fenders for your ride. PRODUCT DETAILS - Size-specific fit for original tire spec - Stays and hardware sold separately - For all related assembly parts, please see the product page for your specific bike model

Keep yourself and your gear clean and dry with a stylish fender. Original equipment replacement fenders for your ride. PRODUCT DETAILS - Size-specific fit for original tire spec - Stays and hardware sold separately - For all related assembly parts, please see the product page for your specific bike model

Keep yourself and your gear clean and dry with a stylish fender. Original equipment replacement fenders for your ride. PRODUCT DETAILS - Size-specific fit for original tire spec - Stays and hardware sold separately - For all related assembly parts, please see the product page for your specific bike model

Keep yourself and your gear clean and dry with a stylish fender. Original equipment replacement fenders for your ride. PRODUCT DETAILS - Size-specific fit for original tire spec - Stays and hardware sold separately - For all related assembly parts, please see the product page for your specific bike model

Keep yourself and your gear clean and dry with a stylish fender. Original equipment replacement fenders for your ride. PRODUCT DETAILS - Size-specific fit for original tire spec - Stays and hardware sold separately - For all related assembly parts, please see the product page for your specific bike model

Keep yourself and your gear clean and dry with a stylish fender. Original equipment replacement fenders for your ride. PRODUCT DETAILS - Size-specific fit for original tire spec - Stays and hardware sold separately - For all related assembly parts, please see the product page for your specific bike model

Keep yourself and your gear clean and dry with a stylish fender. Original equipment replacement fenders for your ride. PRODUCT DETAILS - Size-specific fit for original tire spec - Stays and hardware sold separately - For all related assembly parts, please see the product page for your specific bike model

Keep yourself and your gear clean and dry with a stylish fender. Original equipment replacement fenders for your ride. PRODUCT DETAILS - Size-specific fit for original tire spec - Stays and hardware sold separately - Length: Fender-end (BB side) to middle of slotted seatstay mount hole—309mm - For all related assembly parts, please see the product page for your specific bike model

Keep yourself and your gear clean and dry with a stylish fender. Original equipment replacement fenders for your Powerfly FS. PRODUCT DETAILS - Designed specifically for the 2021 Powerfly FS - Requires specific 2021 Trek Powerfly FS rear rack to mount - Mounting hardware not included - 27.5" & 29" wheel size compatible

Keep yourself and your gear clean and dry with a stylish fender. Original equipment replacement fenders for your Powerfly FS. PRODUCT DETAILS - Designed specifically for the 2021 Powerfly FS - Protects the rear shock when not using the full fender

An innovative addition to keep the mud out of the main pivot Product details Cross compatible with Fuel EX Gen 6 models Not compatible with Fuel EXe Alloy Refer to Service Manual for assembly instructions and service

Genuine replacement parts Keep yourself and your gear clean and dry with a stylish fender designed just for the 2024 Slash. Product details - Designed for 2024 Slash - Only compatible with 27.5" rear wheels - Fender can be removed for 29" wheel - Hardware included - Refer to the Service Manual for assembly & service instructions

Genuine replacement parts No one wants that wet stripe down their back. Keep yourself and your gear clean and dry with a stylish fender. Accessorize your ride. Keep yourself dry. - Original equipment replacement fenders for Allant+ and Zouma+ - Color matched for direct compatibility - Hardware sold separately

Genuine replacement parts No one wants that wet stripe down their back. Keep yourself and your gear clean and dry with a stylish fender. Accessorize your ride. Keep yourself dry. - Original equipment replacement fenders for Allant+ and Zouma+ - Color matched for direct compatibility - Hardware sold separately

An easy-to-install fender for blocking tire spray and protecting fork stanchions in sloppy conditions. SO FAST AND SO CLEAN The Bontrager Enduro Front Fender keeps menacing tire spray away while also protecting your fork stanchions from trail splatter. This durable, flexible poly fender has you and your bike covered when the trail gets sloppy. Installation is quick and easy, and the reversible design offers graphic options for bonus styles, free of charge. PRODUCT DETAILS - Quick and easy attachment installs to most forks in seconds - Easy installation with four attachment locations (attachment zip ties not included) - Multiple mounting eyelets for easy adjustment and compatibility for most forks and tire widths - Flexible 1mm poly material is durable and can be easily cleaned - Reversible design offers two graphic options - Recyclable polypropylene material