Safety

The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter

- Made in the USA - Wide field of view with three pivot points for total adjustability - Lightweight and optically correct - Fits helmet visors and eyeglasses; will fit helmets with adapter

- 115 decibel horn with volume control switch - Mounts to most handlebars - Air reservoir is easily refilled with any bike pump - no batteries needed - Extension allows for more versatility when mounting

Replacement safety flag for extra visibility.

Don't let the half-pint stature fool you, Mirrycle's little Incredibell Brass Solo packs the beautifully resonant ring of solid brass. Its compact size and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and it rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

The LTD Mirrycle Mirror quickly attaches to Bontrager Isozone handlebars using the supplied wrench. It has a convex mirror for a wide field of view to help you clearly see approaching traffic. And the mirror easily adjusts to your optimum viewing angle.

Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

- The ultimate flexible helmet mirror - Custom fit and flexibility allows for the best view angle - Built with safety in mind with no glass, exposed wire or sharp edges - Compatible with all type of helmets

- Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts on either side of helmet offering a wide range of adjustment - Mirror and/Or arm can be detached from helmet mount - Adhesive backed plastic fan-Plate fits most helmets

The Mirrycle Road Mirror was developed exclusively to fit Shimano STI shifter/brake levers without interfering in any way. The Road Mirror fits almost all the different shift/brake combos. It goes on quickly and easily with the included tools. Just a flick of your eyes allows for a quick view behind. And, it can be attached to either the left or right side lever. Let's be careful out there.

Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear. - Weight: 26g (.9oz) - Dome Diameter: 34mm (1.34") - Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters

Add a touch of cool to your bike while increasing your riding safety. - Designed for our Fashion, Attitude, and Classic Cruiser collections - Can be adjusted for use on right or left-hand side of handlebars - 10 cm wide x 6 cm tall x 10 cm long arm

- The original third-Eye eyeglass mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to left or right sun/Eyeglass temple-Arm - Rubber-Tipped outer prongs provide a no-Slip mount

Let everyone know your coming with Sunlite's Candy Mini Bell. It comes in a variety of colors to match your bike and gives you a resounding "ping." It fits most bars and can be used right or left handed.

Made of solid brass, this bell’s melodic sound is full and old-fashioned. Big and brassy, the perfect accompaniment for cruisers, comfort, and town bikes. - Dome Diameter: 51mm (2") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

Mirrycle's Candibell is more than just a fun, compact bell, it’s the loudest Incredibell of all. - Dome Diameter: 48mm (1.9") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

Origin-8's Ping XL is a sure way to announce your presence. This 33mm bell provides a pleasant, melodic tone and a mount that fits 22.2 - 31.8mm handlebars.

•Handlebar mount •Fits most bikes •Alloy ringer style bell •53mm

•Classic Bugle design •Clamp fits most handlebars

•Combines Ping bells and streamers •One bell on each end of the handlebar •Mounts inside handlebar under grips •Optional hand held use

•Handlebar mount •Right or left hand use •Fits all bicycles •Alloy ping style bell

• Heavy duty • Fits most bars

Let everyone know your coming with Sunlite's Windmill Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed. And perhaps best of all, for added flair the windmill spins as you ride through the wind!

How you say "hello" in Electra. - Oversized bell with cheerful "ding-dong" doorbell style ring - Fits standard bicycle handlebar - Includes attachment hardware

An incredibly loud brass bell (approximately 60 db) from CatEye meets their FlexTight mounting band for mounting versatility across all types of handlebars. The bright, clean sound of brass alerts other pedestrians and riders to your presence.

A new angle on bells. Low and lean looking; very techy too. - Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters

- Arguably the most fun way to alert other riders or pedestrians of your presence - Classic bugle-style horn has a deep tone - Easily mounts to bicycle handlebars without tools - Classic steel horn with a large rubber bulb and a gloss painted surface - Plastic bracket with silicone strap fits a wide variety of handlebars

Let everyone know your coming with Sunlite's Ding Dong Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.