Headsets

The Sunday BMX headset is a quality headset at an affordable price: period. It offers one of the lower stack heights on the market and uses a Campagnolo standard spec for 1-1/8-inch integrated headsets. - 45º tapered bearings with 41.8mm outer diameter to fit 42mm BMX head tubes - Compatible with Odyssey GTX Gyro, GTX-R, GTX-S and Snafu Mobeus. - Comes with matching 3mm and 5mm spacers - Weight with/without spacers: 2.1/2.3 oz.

The Ritchey Logic Threadless headset features a smaller upper bearing to save weight, while the oversize lower bearing is designed to handle loads. Deep bearing cups promise solid insertion. - Bearing: Retainer ball bearing - Material: Steel/Plastic - Stack Height: 28.3mm

This custom 7075-T6 aluminum pre-load bolt design is included with every Odyssey fork. - Fits both a 6mm and 8mm allen key. - Front brake cable thru-way hole for removal without disconnecting brake hardware. - Designed with an easy-cut thread groove if you cut your fork’s steerer tube down.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS41/28.6/H9/K|IS52/40/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 41.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 87g

Zipp's Stem Top Cap and Bolt are designed to work specifically with Zipp stems. The eight-gram aluminum cap and nine-gram-bolt are the same as those used on bikes built for Zipp-sponsored professional teams. The bolt has a T25 Torx head for ease of adjustment and so you need only one tool for your Zipp cockpit.

Made in the USA, BlingKits add a dash of style and color to any bike in an easy to manage package. - Includes a 3mm, 5mm,10mm,15mm headset spacer and integrated 5mm top cap - Includes 2x sets of anodized to match bottle cage bolts

Crown races for Wolf Tooth headsets. - For Wolf Tooth headsets

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. - Stainless Steel Bearings provide unparalleled corrosion resistance - Highly recommended if your headset will be exposed to wet conditions or sweat - Lifetime warranty

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. Stainless Steel Bearings provide unparalleled corrosion resistance Highly recommended if your headset will be exposed to wet conditions or sweat Lifetime warranty

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. - Stainless Steel Bearings provide unparalleled corrosion resistance - Highly recommended if your headset will be exposed to wet conditions or sweat - Lifetime warranty

Headset bearings for Wolf Tooth headsets. Replacement bearings

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. Stainless Steel Bearings provide unparalleled corrosion resistance Highly recommended if your headset will be exposed to wet conditions or sweat Lifetime warranty

Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8"" steerers only - Made from 6061-T6 Aluminum

Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in the Minneapolis, MN USA - Fits 1 1/8"" steerers only - Made from 6061-T6 Aluminum

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. - Stainless Steel Bearings provide unparalleled corrosion resistance - Highly recommended if your headset will be exposed to wet conditions or sweat - Lifetime warranty

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. - Stainless Steel Bearings provide unparalleled corrosion resistance - Highly recommended if your headset will be exposed to wet conditions or sweat - Lifetime warranty

- Upper Headset Assembly for 2010+ Madone - Bearing, Compression Ring, 15mm Top Cap - Go green and save green — Zero packaging means zero waste and zero extra cost

Custom Cane Creek lower race for Salsa.

RockShox's Headset Spacer Set is a perfect compliment to your RockShox fork. These lightweight 1 1/8-inch headset spacers feature a carbon finish with stylish RockShox logos. - Black/White Logo: includes 15mm x 1, 10mm x 1, 5mm x 2 - UD Carbon: includes 20mm x 1, 10mm x 1, 5mm x 1, 2.5mm x 2

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Classic Drop-In Integrated Headset stands above all others. This alloy beauty features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. Wrapped in our timeless high-polish finish, the Classic Drop-In Upper headset adds that classy detail your bike deserves. - Stack height: 12.5mm - Material: Alloy - Upper Fit (S.H.I.S.): ZS44/28.6 - Upper HT OD/ID: 50/44 - Bearing: Ceramic Hybrid Cartridge (ACB)—Ti Coated - Weight: 79g

The Ritchey Comp Cartridge Drop In Integrated headset lower features full-complement, stainless steel, angular contact, sealed cartridge bearings packed with Ritchey high-webbing grease. - Material: Alloy - Bearing: Sealed cartridge - Weight: 39g

The Ritchey Comp Cartridge Drop In Integrated headset upper features full-complement, stainless steel, angular contact, sealed cartridge bearings packed with Ritchey high-webbing grease. - "Size" = Top cap height - Material: Alloy - Upper Fit (S.H.I.S.): IS42/28.6 - Upper Bearing OD: 41.8 - Top Cover OD: 46 - Bearing: Sealed cartridge - Weight: 35-44g

The CroMo Ritchey Comp Cartridge Press Fit Lower Headset features full complement stainless steel angular contact titanium-coated, sealed cartridge bearings packed with Ritchey high-webbing grease. - Material: CroMo - Bearing: Ti coated, sealed cartridge - Weight: 40-52g

The Ritchey Comp Cartridge Press Fit Upper Headset features full complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Top cap: 7.3 or 12.4mm - Material: CroMo - Upper Fit (S.H.I.S.): ZS44/28.6 - Upper HT OD/ID: 50/44 - Bearing: Sealed cartridge - Weight: 43g (7.3mm), 51g (12.4mm)

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Comp Drop In Integrated Headset stands above all others. The Comp features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Top cap: 8.3 or 15.3mm - Material: Alloy - Upper Fit (S.H.I.S.): IS42/28.6 - Lower Fit (S.H.I.S.): IS42/30 - Upper Bearing OD: 41.8 - Lower Bearing OD: 46/42 - Top Cover OD: 46 - Bearings: Sealed cartridge - Weight: 74g

The Ritchey Logic Threadless headset features a smaller upper bearing to save weight, while the lightweight, precision-machined aluminum cups are deep for solid insertion. - Bearing: Semi cartridge - Material: Steel - Stack Height: 30.2mm

Bringing Ritchey's heritage of legendary cycling products into the world of e-bikes and electronic shifting, Tom Ritchey designed a unique headset that allows the cables to be run internally from the stem into standard frames without requiring the frame or fork to be modified. The Logic-E headset is designed to allow Shimano Di2 and STEPS cables to be concealed from view and the wind while protecting them from damage. - Steerer size: 1-1/8" upper - Drop-in (IS) or Press-Fit (S) - Weight: 35-44g

For bikes with press-fit head tubes, the Ritchey Comp Press Fit headset stands out above all others. The Comp features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. The upper bearing is a sealed cartridge, while the lower bearing is coated in titanium. - Upper Fit (S.H.I.S.): ZS44/28.6 - Upper HT OD/ID: 50/44 - Lower Fit (S.H.I.S.): ZS44/30, ZS55/40, ZS55/40 - Lower HT OD/ID: 50/44, 61/55, 61/55 - Material: CroMo - Top cap: 7.3 or 12.4mm - Upper Bearing: Sealed cartridge - Lower Bearing: Ti coated, sealed cartridge - Weight: 83g (7.3mm), 103g (12.4mm)

- Fork crown race for genuine Ritchey headsets - Alloy with 45-degree taper