Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Bottom Brackets

Interloc Racing Design QB55 JIS Bottom Bracket
$33.90
- High quality sealed cartridge bearings with steel cups - Traditional square JIS 2-degree taper crank-arm interface - 68/73mm English (BC1.37 x 24tpi - RH/LH). Compatible with IRD retrofit cups (sold separately), RD-419
Vuelta Square Taper Bottom Bracket
$15.00
-Traditional chromoly square taper crank-arm interface with steel cups - 108mm for use with most Track cranks - 110mm for use with most Road double cranks - 113mm for use with most Road triple cranks - 118mm for use with most Mountain triple cranks - Bolts included
Campagnolo Centaur Cartridge Bottom Bracket
$75.00
Features three sealed cartridge bearings. - Fits Daytona, Racing Triple, Centaur, Veloce and Mirage, 1193 and later Athena and pre-1995 Record and Chorus - 115mm spindle recommended for triple cranks and 32 or 35mm seat tubes - Unique taper is not compatible with Shimano - Weight: 233 grams
Sunlite Hex Head BB Axle Bolts
$4.59
- With plastic washers - Shell: 8mm Allen head axle bolt
Shimano Dura-Ace R9100 Hollowtech II Bottom Bracket
$39.99
Shimano Dura-Ace BB92, BB9000 Hollowtech II Bottom Brackets - Bottom Bracket Shell I.D.: 1.37" - Defined Color: Black - Weight: 65 g - Spindle Interface Type: Shimano Hollowtech II
Surly O.D. Enduro Bottom Bracket
$65.00
Surly OD Bottom Brackets - Compatible with 24mm spindles - Moonlander BB fits a 100mm bottom bracket shell, but exterior width conforms to BB121 standard
Race Face Cinch Bottom Bracket
$36.99 - $74.99
- Allow the use of a 24mm spindle with Shimano press fit shells - Bearings races are fully coated for improved corrosion resistance - Bearings are factory filled with Phil Wood grease
Race Face Cinch Double Row Bearing Bottom Bracket
$79.99
- Double row bearings improve lifespan with enhanced durability - Allows the use of a 30mm spindle with Shimano press fit shells - Bearings races are fully coated for improved corrosion resistance - Bearings are factory filled with Phil Wood grease
Problem Solvers Bushnell Fat Bike Eccentric Bottom Bracket
$150.00
The Problem Solvers Bushnell Eccentric Bottom Bracket is the industry leading design for chain tension adjustment on tandem and dedicated single speed bikes equipped with eccentric bottom bracket shells. The classic version features full-body, aluminum construction across the shell for maximum surface area friction and additional value. The Bushnell Fat Bike Eccentric Bottom Bracket is designed for the 100mm shells in most fat bikes. - Accepts English threaded bottom bracket cups - Classic, full-body design - Diameter of part - 2.118 inches (53.78mm) - Fits BB shells from 53.8 ~ 54mm I.D. without shim - Fits BB shells up to 100mm width
Shimano BB-UN26 E-Type Cartridge Bottom Bracket
$13.99
Cartridge-style bottom bracket for use with E-Type front derailleurs. - Smooth rotation - Square taper spindle - Sealed cartridge bearing assembly
Origin8 BB86 Press Fit Bottom Bracket
$41.99
Aluminum cups - Fits BB86 and BB92 - Includes shims for GXP - SHIMANO Equivalent SMBB-72-41B / SMBB-71-41A - Shell: 86mm - Spindle Type: HT2/GXP - Weight: 103g
Origin8 XLT Square Taper BB
$17.99
- Designed for fat tire bikes - Chromoly spindle - Sealed bearings
Wheels Manufacturing Inc. T47 Outboard Angular Contact Bottom Bracket for 22/24mm Spindles
$109.00
T47 threaded BB cups for running 22/24mm stepped spindle (SRAM) cranks in T47 frames. Cups have outboard bearings and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact (22/24mm SRAM non-drive-side bearing: ABEC-3) - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68mm - 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.2mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16-notch
Problem Solvers Bushnell Lightweight Eccentric Bottom Bracket
$175.00 - $180.00
The Problem Solvers Bushnell Eccentric Bottom Bracket is the industry leading design for chain tension adjustment on tandem and dedicated single speed bikes equipped with eccentric bottom bracket shells. The lightweight version features additional machining and drilling of the alloy body to reduce weight. - Accepts English threaded bottom bracket cups - Lightweight, cut-out body design - Outer Diameter - 54mm
SRAM GXP BlackBox MTB PressFit Bottom Bracket Cups w/Ceramic Bearings
$232.00
SRAM's GXP BlackBox MTB PressFit Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature ceramic bearings that drastically reduce drag on the crankset, meaning more of your power goes directly to the trail. Plus, these BB cups press directly into the frame without having to be threaded in for reduced weight and enhanced durability.
TruVativ HammerSchmidt All Mountain Bottom Bracket Cups
$62.00
Truvativ's HammerSchmidt All Mountain Bottom Bracket Cups let you get the most out of every pedal stroke. This fine bottom bracket features a whopping eight seals to keep mud and debris out.
Origin8 Torqlite Square-Taper Bottom Bracket
$41.99
Pedal smoothly and steadily with Origin-8's Torqlite Square-Taper Bottom Bracket. The forged aluminum body and cups are light and tough, the CNC'd hollow-chromoly spindle is stiff and shaves more grams, and the sealed bearings are super smooth and durable.
Origin8 ISIS Bottom Bracket
$41.99
Origin-8's ISIS Bottom Bracket is everything you need to get your wheels rolling. It features a steel body and hollow-chromoly spindle that adds stiffness and cuts down on weight. The sealed bearings are super smooth and durable, and this fine BB is available in 3 sizes with a 68mm shell.
Campagnolo Power-Torque OS-Fit Integrated Bottom Bracket Cups
$74.99
Campagnolo's Power-Torque OS-Fit Integrated Bottom Bracket Cups let you install your Power-Torque crankset (sold separately) into an oversize bottom bracket shell. They are constructed from anodized aluminum for low weight and excellent durability. And, they're available to fit frames with BB30 and BB86 bottom bracket shells.
Wheels Manufacturing Inc. T47 Angular Contact Bottom Bracket for 22/24mm (SRAM) Spindles
$109.00
T47 threaded BB cups for running 22/24mm spindle (SRAM) cranks in T47 frames. Cups have internal bearings and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact (non-drive-side bearing: ABEC-3) - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68mm – 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.7mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 48.5mm x 16-notch
SRAM GXP Team Bottom Bracket
$38.00
Get the most out of SRAM's high-tech cranksets with the GXP Team Bottom Bracket. Built to last, this super-smooth bottom bracket lets your SRAM GXP crankset (sold separately) spin effortlessly without weighing you down.
Shimano XTR Bottom Bracket
$34.99 - $40.99
Pressfit Model: • For use on BB86/92 bottom bracket shells • Compatible with 24mm spindle Hollowtech II cranksets • BB Shell Width (mm): 92 mm • BB/Frame Interface: BB86 , BB92 • Bottom Bracket Shell I.D.: 41 • Defined Color: Black • Spindle Interface Type: Shimano Hollowtech II Threaded Model: • Includes 3 x 2.5mm spacers • Includes TL-FC24 adapter tool • Reduced size for light weight • New seal construction for smoother rotation • Requires TL-FC34 or included TL-FC24 adaptor for installation & removal • BB Shell Width (mm): 68 mm • BB/Frame Interface: English • Defined Color: Black • Spindle Interface Type: Shimano Hollowtech II • Weight: 77 g
Race Face X-Type Team XC Bottom Bracket
$44.99
Designed to be used with X-Type or EXI cranksets. Manufactured from high strength aluminum & featuring custom retainer bearings. Features • BB Cups are forged & CNC machined from 6066 aluminum. • Tapering wall construction to minimize weight. • Custom 6805 16 ball retainer bearing • Bearings feature our custom triple wiper seal to better retain grease & keep contaminants out. • Bearings are factory filled with Phil Wood waterproof grease — tested & proven to extend bearing life.
Origin8 Torq Lite Outboard Ceramic Bottom Bracket
$109.99
Maximize your pedaling efficiency with Origin-8's Torq Lite Outboard Ceramic Bottom Bracket. It features CNC'd 6061-aluminum cups with super-smooth and durable double-sealed ceramic bearings and stainless-steel races. It is made for 68mm, 70mm or 73mm bottom brackets and can be used in road or mountain bikes. It comes with spacers and has an anodized and laser-etched finish, too.
Origin8 Eccentric Bottom Bracket Adapter
$59.99
• Eccentric design allows up to 14mm of adjustment • CNC aluminum construction • Eccentric BB converts BB30 to Shimano HollowTech 2
Campagnolo Record Bottom Bracket Cups
$35.00
Campagnolo's Record Bottom Bracket Cups are perfect for your Campy Ultra-Torque crankset (sold separately). They are constructed from anodized aluminum for light weight and excellent durability. They are available in English and Italian thread. • Italian: 70mm • English: 68mm
Sunlite SL-55 BB
$28.99
- Forged steel body - Alloy cups - Chromoly spindle - Sealed bearings - Interface: English - Spindle Type: Square Taper JIS - Weight: 290-300 grams
Sunlite SL-26 BB
$13.99
- Steel body - Steel cups - Chromoly spindle - Sealed bearings - Interface: English - Square Taper JIS - Weight: 305-320 grams
SRAM PressFit 30 Ceramic Bearing Bottom Bracket
$245.00
SRAM saw the opportunity to make a better press fit system where all the best from BB30 and PressFit bottom brackets would be combined into one captivating package. Pressfit 30 will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. The key difference with Pressfit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets. - Easy installation - PressFit cups for lighter weight - Narrow Q-factor and more ankle clearance - Integrated gutter seal to prolong life - Integrated adjuster - 30mm spindle diameter For installing any crankset with a BB30 spindle into any BB30 frame or frame with 46mm I.D. press fit diameter bottom bracket shell - BB Shell Width (mm): 68 mm, 73 mm, 79 mm, 86 mm, 92 mm - BB/Frame Interface: 386 EVO, BBright Press Fit, PF30, 392 EVO - Bottom Bracket Shell I.D.: 46 - Spindle Interface Type: e*Thirteen P3 Connect, 392 EVO, 386 EVO, Campagnolo Over-Torque, Hope BSA30, RaceFace/Easton CINCH, Rotor 3D+
Easton Bottom Bracket
$49.99
Tech specs: - BSA: 91g - PF30: 117g - BB86: 66g - BB386: 103g