Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$27.50 - $29.99
The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer. Top caps are compatible with all 1-1/8" aluminum steerer tubes. The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes. KIT INCLUDES - EDC TOP CAP - EDC steerer plug - 2x 1mm, 3mm, & 5mm Headset Spacers
$47.50
If you're not looking for chain retention or your bike has an integrated chain guide, you can still add some bash protection with the OneUp ISCG05 Underbash. The Underbash includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T. Designed for frames with 2 ISCG05 tabs only (Evil, Rocky Mountain, etc). If your bike has three ISCG05 tabs, check with the frame manufacturer to ensure the lower tabs are strong enough for a bash application. Failure to do so could result in frame damage. FEATURES - Install without removing your crank - Single tool install and adjustment - Boost compatible - Oval Compatible - Stainless Steel hardware - Includes 3 bash plates (28-30T, 32-34T, 36T) SPECS - Weight: 68g 32-34T - Capacity: 28-36T - Chainline: 2.5mm adjustment - Mount: ISCG05 2-Bolt ONLY - Color: Black - Material: 7075 aluminum, glass reinforced thermoplastic
$80.00
Fit Kit SET812 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru-axle. This kit includes: - 12 x 159—165mm thru axle with 1.5 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$5.99
The Odyssey stem bolt pack features 6 - 6mm stem bolts that are M8 x 1.25mm thread.
$8.99
- Lower cables for Odyssey's Gyro G3 (sold separately). - Universal fit. - Lower cables only.
$7.99
KS Dropper Post Service Parts
$1.50 - $2.50
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$16.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Shimano, SRAM, and KMC 11-speed chains
$10.00 - $12.00
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$4.05
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$4.95
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$6.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC and Shimano 10-speed chains - Includes 2 pairs
$59.99 - $64.99
Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. - KEB-SL - linear strand, Kevlar reinforced, compressionless brake housing with Slick-Lube liner - Perfect for full-housing, high-performance bikes with mechanical disc or rim brakes - 20 black alloy lined end caps, 10 black POP end caps included
$35.00
If your plan is to install a 386EVO crank into a PF30A or BB30A Cannondale frame, look no further. This adapter from FSA is just what you need.
$9.50
Replacement headset bearings from FSA. - Compatible with most Trek MTB integrated headset systems - Sealed bearing for long life - Compatible with Knock Block Headsets
Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild
ABI Headset Bearing for new builds or replacements.
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
$36.99
High-quality replacement headset bearings are smooth like butter. - Sealed cartridge bearing for long life - Durable steel bearing housing
$17.99
Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt - Weight: 12g
$36.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase - Forged 6061 aluminum - Threaded alloy top cap
$34.99
- Clamps to a threadless steerer - Offers up to 4-1/2" stem height increase - Forged 6061-aluminum provides extra strength - Machined aluminum top cap is threaded, providing easy installation
$21.00
- Adapts 35mm CenterLock rotor-mount splines to accept an International Standard 6-bolt, 44mm BCD rotor - Does not fit Saint-style 47mm Oversize CenterLock, and will not work with thicker, aluminum-carrier Hope 2005+ style Mono-series rotors - Designed for up to 210mm rotors - Tabs in adapter mate to (6) M5 rotor bolt holes and is secured by CenterLock-style lockring, sandwiching 6-bolt rotor to adapter - Lockring requires a 16-notch external bearing bottom bracket wrench - CL-IS adapter is black and lockring is black with silver etching: 29g
$16.99
Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 18307 Bearing
$16.99
Bearings for maintaining and rebuilding DT Swiss hubs. - DT Swiss 6803 Bearing
$49.99
Dropper remote optimized for drop bar gravel bikes. - Single mounting bolt for left-hand actuation - Two-way drop actuation for use in multiple hand positions - Compatible with Highline and other cable-actuated dropper seatposts - check with your seatpost manufacturer.
$27.45
Alloy braze-on adaptor clamps are designed to work with all Campagnolo braze-on front derailleurs
$29.99
Alloy braze-on adaptor clamps are designed to work with all Campagnolo braze-on front derailleurs
$25.00
Campagnolo small parts for bottom brackets.
$14.99 - $19.99
Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager Pro Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look
$32.99
Upgrade or refresh your Bontrager wheels. - Replacement axle end caps - Compatible with Bontrager Elite-level hubs
$19.99
Upgrade or refresh your Bontrager wheels. - End cap for Bontrager Rapid Drive 108 hubs - Sold individually
$2.99
Product details - Use in chainstay pocket to seal sensor into frame
Key features: - Adapter to fit Bontrager Race Lite Ergo Bar Ends to Bontrager Satellite Plus IsoZone Handlebars - Only compatible with the Bontrager Satellite Plus IsoZone Handlebar - For most other bar ends, use: Bontrager Satellite Plus IsoZone Bar End Adapter
$11.99 - $19.99
Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands
- Saddle clamp for straight seatpost - Diameter: 22.2mm
$14.99
These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars. - Required for bar end use on Satellite Plus Isozone bars - For use with clamp style bar ends - Includes 2 adapters and 2 rubber handlebar inserts. - Bar end sold separately
$27.00
- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors
$19.99
The absoluteBLACK integrated headset top cap is a one-piece top cap and bolt with a 5mm hex socket. It is designed to fit every standard starnut. - One-piece design is lightweight (only 4g) - Not suitable for "expanding" star nuts with a steel coil spring - Compatible with the ENVE compression plug
$21.99
absoluteBLACK's Chain Catcher is designed to eliminate the possibility of the chain falling in towards the frame when shifting to the inner chainring on uneven road. Chain Catcher is a simple add-on component which improves the overall function of your drive train and protects your valuable frame from dropped chains. Especially recommended for carbon frames. No matter how well you set up the front derailleur with round or oval rings, there is always a possibility that chain may find its way to drop on the frame when you shift quickly from outer ring to inner one. Especially on rough or gravel roads. Mounting the Chain Catcher in front of the front derailleur will prevent such occurrence from happening because the chain will be guided precisely onto the small ring and will not be able to go any further towards the frame. Our Chain Catcher has a conical tapered head, providing an excellent fit to braze-on mounts that are integrated with frame. However, with older frames you may use a clamp braze-on adapter. In such case please ensure that your adapter has a front face also conical (not flat). Unlike the majority of chain catchers on the market, absoluteBLACK's Chain Catcher can be precisely adjusted to ensure only minimal gap is left to the inner chainring for maximum security. - Mass/Size: 11.6g / one size fits all - Compatibility: All braze-on frames and derailleurs. - Adjustability: 6mm chainline adjustment provided on the slot for precise setup - Material: CNC machined 7075 T6 / M5 stainless steel bolt - Finish: type II anodizing
$499.00
The absoluteBLACK's HOLLOWcage® for SRAM eTap AXS RED and Force 12-speed derailleurs makes the AXS drivetrain whisper quiet. It features a carbon-polymer mono-plate construction with bespoke, oversized, full ceramic bearings and one of the most advanced silencing pulleys ever made. - Designed for use with SRAM RED and Force AXS drivetrains - The Silent Xring Pulley dampens the chain impact on the guide pulley teeth, eliminating the engagement noise - Incredibly silent (over 12dB noise reduction vs stock) - HOLLOWcage uses full ceramic bearings (Silicon Nitride ceramic balls and Zirconia Oxide ceramic races) that make the guide pulleys incredibly stiff for greater shifting precision - One of the lightest oversized cages on the market (69g) - Works with 10-28t, 10-33t, and 10-36t cassettes - Not compatible with SRAM XPLR or 11-speed RED/Force - ONLY works with AXS flat top chain
$44.00
Zipp Speed Weaponry Cartridge Bearings
$30.00
Precise spacers keep your headset tight, and provide correct bike handling and component life. Lightweight and precisely parallel, Zipp carbon headset spacers are precision ground to keep your fork secure through every twist, turn and bump in the road. 1-1/8-inch diameter in 4, 8, 12, and 30 mm heights.
$298.00
- Includes 61803 (1) and 61903 (1) bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp Super-9, 900 tubular and Sub-9 disc rear hubs
$298.00
- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - These 61803 bearings are not interchangable with the 88/188 hub 61803 bearings
$6.00
Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions
$7.00
- Plastic bar end plug pair for 22.2mm extensions
$12.00
Designed for use with the Zipp SL Speed Seatpost; an internal mount to hold a Shimano DI2 seatpost battery. - Mount compatible only with B1 SL Speed seatpost - Weight: 18g for 27.2mm, 19g for 31.6mm
$6.00
ZIPP Service Course Bar End Plugs, Qty 2.
$14.00
Zipp's Stem Top Cap and Bolt are designed to work specifically with Zipp stems. The eight-gram aluminum cap and nine-gram-bolt are the same as those used on bikes built for Zipp-sponsored professional teams. The bolt has a T25 Torx head for ease of adjustment and so you need only one tool for your Zipp cockpit.
$5.04
Zipp Speed Weaponry Bolt Kits
$34.14
Zipp Speed Weaponry Vuka / Stealth Riser Kit - Bolt kits sold separately
$64.00
Zipp developed an extensive line of aluminum aerobar extensions to provide the perfect fit for any rider, regardless of size or riding position. Vuka extensions are designed to deliver improved aerodynamics by placing hands closer together and nearer to the rider’s head to start airflow over the rider sooner. Designed with input from top bike fitters, the shape of the Vuka Alumina Evo is crafted to feel as if the rider is shaking hands with the bar. This is achieved through the use of a multi-radius bend paired with a 20mm inward roll of the bar that can be adjusted to dial in fit and achieve an ideal position. - Clean internal cable routing for easy installation - Length: 360mm
$64.00
Zipp developed an extensive line of aluminum aerobar extensions to provide the perfect fit for any rider, regardless of size or riding position. Vuka extensions are designed to deliver improved aerodynamics by placing hands closer together and nearer to the rider’s head to start airflow over the rider sooner. Vuka Alumina Race Extensions feature 52mm of rise, along with a bend that places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics. - Clean internal cable routing for easy installation
$172.00
The perfect bike fit needs to blend slippery aerodynamics and a comfortable, stress-free body position while optimizing control over the bike. Top fitters are constantly devising new methods to maximize and balance these goals. Designed using feedback from top fitters, Zipp’s Vuka Carbon Extensions give you all the options needed to optimize your position and go for the win or your personal best: Vuka Carbon Evo extensions decrease drag by starting airflow over the body sooner while keeping the arms and wrists in a comfortable, relaxed position. The Evo shape, with a 20mm inward roll and multi-radius bend, is constructed using carbon fiber, allowing for even more complex shaping and lighter weight. - Compatible with all 22.2mm clip-on systems - Material: Unidirectional carbon - Internal cable routing - Length: 380mm
$28.00
Zipp Speed Weaponry Aero Bar Parts - Includes 2 replacement pads and Velcro - May be used with the older Vuka Clip and Vuka Aero - Elbow pads embossed with Zipp brand logo
$27.00
Vuka Alumina Clip Risers are designed for use with the Vuka Alumina Clip's above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system.
$151.00
The VukaClip is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position at an affordable price. Redesigned to be easier to set up and adjust, the VukaClip has a large, redesigned armrest to reduce pressure points and increase comfort. The VukaClip is made with the industry-standard 22.2mm clamp diameter for maximum versatility, making it compatible with most extensions on the market. Designed with input from top bike fitters, the shape of the Vuka Evo Extensions are crafted to feel as if the rider is shaking hands with the bar. This is achieved through the use of a multi-radius bend paired with a 20mm inward roll of the bar that can be adjusted to dial in fit and achieve an ideal position. - Bar-setting fit, security, and adjustability - Compatible with most extensions
$269.00
The VukaClip is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position at an affordable price. Redesigned to be easier to set up and adjust, the VukaClip has a large, redesigned armrest to reduce pressure points and increase comfort. The VukaClip is made with the industry-standard 22.2mm clamp diameter for maximum versatility, making it compatible with most extensions on the market. Vuka Race Extensions feature 52mm of rise along with a bend that places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics. - Bar-setting fit, security, and adjustability - Extension material: Unidirectional carbon
$29.95
Wolf Tooth ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and more. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look. - Designed to work with rear (right side) brakes and shifters - Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters - For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque - 6061-T6 aluminum - ISEV-ISB is for a Shimano I-SPEC EV shifter mounting to a Shimano I-SPEC B brake