Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other

$14.99
Keep your seatpost right where you left it. Upgrade to a quick release seatpost clamp for easy seat height adjustments.
- Follow laser-etched torque listing on collar

$36.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase
- Forged 6061 aluminum
- Threaded alloy top cap

$35.00
Hurdy Gurdy is another nifty device that keeps a rear wheel from slipping forward in the dropout under pedal load. It's designed for the Cross-Check's semi-horizontal front-loading dropouts, and will also work on many other similar dropouts. Hurdy Gurdy is investment cast of stainless steel for durability and good looks, and shares many of Tuggnut's design features. Its two axle holes allow for a wide variety of fore/aft wheel positions, it will work with standard QRs, bolted axles, and nutted axles up to 10mm.

$20.00
- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains
- DLC Coated
- Non-reusable
- Opening Tool Required
- Card of 2 pairs

$9.99 - $12.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

$24.99
The Problem Solvers Cross Clamp mounts to the seat tube on your frame so that you can make your top-routed shift cables work with a bottom-pull front road derailleurs. This is a common setup on cyclocross bicycles. Choose the diameter that matches your frame.

$60.00
The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru-axle system.

Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 1-bolt

$24.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For use with 142x12mm, 148x12mm, 157x12mm, and 197x12mm hubs
Specifications:
- Size: Rear drive side, Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$19.99
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
$19.99
Allows use of two Blendr mounts on a Trek Madone SLR.
Genuine replacement parts
Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike.
Product details
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory
- Bases for use with the Trek Madone SLR Aero Integrated handlebar
- Add any accessory mount (sold separately) for an elegant, integrated look
- Includes mounting hardware

$17.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 2-bolt

- Wears and functions like other links on the chain
- SIL-TEC surface treatment
- Tool free installation possible
- TL-CN10 is available as SM-CN900-11
- Single use

$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip.
Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.

$29.99
The Problem Solvers Handlebar Accessory Mount comes in handy when you don't have enough room on your handlebars for mounting all your accessories. It fits onto all handlebars, holds tightly and gives you 80mm of width for mounting more of your essential devices where they're easy to see and use (photo).

$8.50
Clean up your Bontrager Elite stem cockpit with Blendr Elite bases.
Blendr works with this simple formula: Stem + Base + Mount. Add accessory.
Key features:
- Bases for use with Elite stem
- Add any XXX accessory mount for an elegant integrated look

$12.99 - $14.99
With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames.
- Features threaded eyelets for rear rack mounting solutions on unique bike frames
- Quick release (QR) versions include rubber lever grip

$41.99
A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.

$14.99 - $19.99
Key features:
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory.
- Bases for use with Bontrager Pro Blendr stem
- Add any XXX accessory mount (sold seperately) for an elegant, integrated look

$20.00
Rated fully KICKASS by a very authoritative entity who will remain unnamed, Surly's cast and polished stainless steel clamps won't rust or chip paint because they can't (even the black ones!). They're shiny! They look good! And most importantly, they deliver the clampability seatposts crave.

$14.99 - $19.99
Key features:
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory.
- Bases for use with Bontrager XXX Blendr stem
- Add any XXX accessory mount (sold seperately) for an elegant, integrated look

$14.99
These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars.
- Required for bar end use on Satellite Plus Isozone bars
- For use with clamp style bar ends
- Includes 2 adapters and 2 rubber handlebar inserts.
- Bar end sold separately

$9.40
Wheels Manufacturing Wide Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay. Wide design offers extra coverage for larger chainstays.

$9.99
Notched binder bolts for frames with integrated seat collars.
Details:
CroMoly steel bolts
Three lengths available: 16, 19 and 21mm
8mm diameter

$27.67 - $39.00
RockShox Reverb Hydraulic Hose Kit for replacing the hyraulic line on your Reverb dropper seatpost.
- Fits all generations of Reverb
- Includes new hose, new strain relief, new barb

$39.99
The Problem Solvers Direct Mount Adapter gives you a place to install direct-mount Shimano and SRAM derailleurs. It was initially developed for standard mountain bike frames with 68/73mm wide bottom bracket shells, and is equally suited to fat/snow bikes, where their 100mm wide bottom brackets make front derailleur applications a little difficult. The adapter is made of light and durable 6061 aluminum.
Page 1 of 42
Next page