Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Forks

$9.99
- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks
$15.90
- Clamps on to dual-Crown fork stanchions to prevent damage to frame - Easy to install and adjust, More secure and lower profile than stock bumpers - Molded loops allow clean and easy zip-Tie number plate mounting - Available for 35mm boxxer or 40mm fox stanchions, Sold in pairs
$18.00 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$20.00 - $292.00
Ever wished you could lock out your front and rear RockShox suspension instantly and simultaneously, to get the extra edge for that final sprint to the finish or the grueling tarmac climb to the top of your favorite trail? Here comes RockShox's XLoc Full Sprint, which allows you to lock your SID or Revelation XX fork and your Monarch XX rear shock (all sold separately) with the simple push of your thumb. XLoc is a completely sealed, dependable lockout control, which works with a single thumb press: push to unlock, push again to lock. It’s that easy. Elite XC racers use their XLoc as often as their shifter, to gain that extra edge when sprinting out of corners or on smooth bits of the course. Now imagine being able to do the same with your fork and shock: that’s XLoc Full Sprint. Includes Motion Control X DNA comp damper, rear shock hydraulic hose, and bleed syringes.
$21.50
- Replacement leg guards for Dorado forks
$27.00 - $29.00
Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork
$45.99 - $49.99
• Caliper brake mounts • 35mm rake • High-tensile steel construction • 1-inch steerer diameter • 185mm steerer length • Threaded fork • Compatible with 20-inch wheels
$49.99
- Hi-tensile steel construction - Caliper brake mount - 35mm rake - Axle-to-Crown: 365mm - Race Diameter: 27mm - Axle: 3/8-inch - Thread Length: 120mm - Steerer Length: 200mm - Steerer Size: 1-inch
$49.99
- Hi-tensile steel construction - Caliper brake mount - 35mm rake - Steerer Type: Threaded - Steerer Size: 1-inch - Steerer Length: 200mm - Brake Mount: Caliper - Axle-to-Crown: 395mm - Race Diameter: 27mm - Axle: 3/8-inch - Thread Length: 100mm
$49.99 - $59.99
Economically priced hi-tensile steel MTB fork for 26-inch wheels. - Steerer Type: Threaded Steerer - Size: 1" (7/8 ID) - Steerer Length: 198mm - Rake: 45mm - Axle-to-Crown: 393mm - Race Diameter: 27mm - Axle: 3/8" - Thread Length: 95mm
$49.99
- Hi-tensile steel construction - Caliper brake mount - 35mm rake - Steerer Type: Threaded - Steerer Size: 1-inch - Steerer Length: 137mm - Brake Mount: Caliper - Rake: 35mm - Axle-to-Crown: 315mm - Race Diameter: 27mm - Axle: 3/8-inch - Thread Length: 40mm
$59.99 - $69.99
- Hi-tensile steel construction - Available with brake studs or without - 60mm rake - Type: Cruiser Size: 26" - Steerer Type: Threaded Steerer - Steerer Length: 250mm - Axle-to-Crown: 400mm - Axle: 3/8" - Thread Length: 125mm - O.L.D.: 100mm
$59.99
- Brake mounts: Caliper - Construction: Hi-tensile steel - Rake: 50mm - Type: LW - Steerer type: Threaded - Race diameter: 27mm - Axle: 3/8'inch
$59.99
• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 180mm
$59.99
• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 200mm
$59.99 - $65.99
• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 200mm • For bikes with 26-inch wheels
$59.99
• High-tensile steel construction • Threadless
$69.99
- Cantilever brake mounts - 45mm rake - Hi-tensile steel construction - Steerer Type: Threaded - Steerer Size: 1-inch - Brake Mount: Cantilever - Rake: 45mm - Axle-to-Crown: 405mm - Thread Length: 120mm - Axle: QR 9mm
$69.99 - $79.99
• Cantilever brake mounts • 45mm rake • High-tensile steel construction • Threaded fork
$79.99 - $89.99
• Caliper brake mounts • 385mm axle-to-crown • Chromoly construction • 1-inch steerer diameter • Threaded fork
$89.99
- Forged dropouts with eyelets, straight-gauge oval tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - 85mm threaded section - Fits up to 30c tires - Axle to Crown Length: 382 mm - Brake Mount (Fork): Long Reach Caliper (55mm - 73mm) - Crown Race: 27 - Front Axle: 9mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill - Steerer Type: Straight - Weight: 839g, 876g, 907g - Wheel Size: 27"
$89.99
Get back on the road with a genuine replacement fork for Electra Townie Commute bikes. Color matched for direct compatibility.
$89.99
Get back on the road with a genuine replacement fork for Electra Townie Go! 8D bikes. Color matched for direct compatibility.
$89.99 - $103.99
• Chromoly construction • V-brake mounts • Fits bikes with 16-inch wheels • Steerer length: 250mm
$89.99
• Cantilever brake mounts • 45mm rake • Chromoly construction • 1 1/8-inch steerer diameter • Threadless fork
$97.90
- Replacement damper kits
$99.99
- Hi-Tensile steel construction - 135mm fat tire front hub spacing - Steerer Type: Threadless - Steerer Size: 1-1/8-inch - Steerer Length: 275mm - Brake Mount: Is Disc - Rake: 45mm - Axle-to-Crown: 450mm - Race Diameter: 30mm - Axle: QR 9mm
$99.99
• High-tensile steel construction • Springer suspension • Threaded • 1-inch diameter (7/8-inch inner diameter) • 20-inch version steerer length: 148mm • 26-inch version steerer length: 180mm
$99.99
• Cantilever brake mounts • Chromoly construction • Threaded fork • For 26-inch wheels • 200mm steerer length
$99.99
• Caliper brake mounts • 45mm rake • Chromoly construction • Threadless fork • 300mm steerer length
Page 1 of 9 Next page