Chainrings

Looking for a SRAM XO1, X1, GX, and NX chainring with the proven chain retention of our patented Drop-Stop chainrings? Wolf Tooth has what you need in these beautifully machined 94 BCD bolt-on chainrings. Fits any 94 BCD SRAM crankset Drop-Stop technology. On Wolf Tooth patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris, which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment Compatibility - These rings fit any SRAM mountain bike crankset with a 94 BCD. - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - Chainline: 49mm - Provides a great chainline on most boost bikes. Specifications - Mount type: 94 BCD - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

Designed to fit Shimano 4-arm 96 Asymmetric BCD XT M8000, SLX M7000, or Deore M6000 1x or 2x cranksets. These rings feature Drop-Stop tooth profiles for mud clearance, chain retention and durability. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075 Aluminum for long life - Use of a clutch-style rear derailleur is recommended

Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - Not compatible with 9 speed chains - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended - Chainline is 52mm

The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets, including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings. Specifications: - Boost: 3mm offset for 52mm chainline - Mount type: Direct Mount for SRAM - Offset: Boost - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy

Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. There are 3 offsets: - Standard: 47mm chainline, 6mm offset for cyclocross and road cranks - Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 - Boost: 52mm chainline, 3mm offset - BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset - If you have a BB30 crankset (30mm diameter Aluminum Spindle) this measurement will determine whether it is a long or short spindle:

More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility - These rings fit on the Shimano XT M8000, SLX M7000, Deore M6000, or FC MT5100 1x or 2x cranksets. - Use only the stock Shimano XT M8000 or SLX M7000 chainring bolts - These CAN be mounted to the XTR 9000 series cranks, but you will have to use the bolt caps that come with that crankset and you will need to file roughly 1mm off the threaded boss on each bolt cap (they are a little too long and don't allow the ring to be tightened down). - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most boost bikes - Must use the stock chainring bolts. The Wolf Tooth chainring bolts are a different size. - Ovality of 10% and timing of 112 degree after TDC (top dead center) - Maximum diameter is that of a chainring 2t bigger than the size you order so be sure there is adequate chainstay clearance. Specifications: - Chainline: 49mm - Boost Crankset Chainline: 52mm - Mount type: 96 BCD for Shimano M8000 and M7000 - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains

Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. - Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended - 52mm chainline / 3mm offset for boost spacing

This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. - Elliptical rings provide smoother, more efficient pedal rotation, which means better traction - Compatible only with Hyperglide+ 12-speed chains - For use with any RaceFace CINCH crankset - Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention - Prevents premature ring and chain wear that can come from non-optimized profiles

This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. - Compatible only with Hyperglide+ 12-speed chains - For use with Shimano XTR M9100 series cranksets - Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention - Prevents premature ring and chain wear that can come from non-optimized profiles

Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.2 - 2.3mm thick so they work well with wider chains.

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

Shimano Dura-Ace 9000 11-Speed Chainrings. - Chainring BCD: 110 Shimano Asymmetric - Color: Silver/Black - Defined Color: Silver - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Outer

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

Shimano Ultegra 6800 11-Speed Inner Chainrings - Material: Aluminum - Ring Position/Type: Inner

Shimano's Ultegra 6800 chainrings provide confidence-inspiring shifting and category-defining speed. Cold-forged aluminum comprises these super-stiff, hollow outer rings, and Shimano's unique system of ramps and pins means lightning fast shifts are at your command. - Bolt circle diameter: 4-bolt 110mm asymmetric - 50T pairs with 34T inner ring - 52T pairs with 36T inner ring - 53T pairs with 39T inner ring Inner rings sold separately

Shimano Ultegra R8000 Series Chainrings are designed for use with Shimano's 11-speed Ultegra crankset.

The Shimano Deore XT SM-CRM85 chainring is designed for use with Shimano's M8100 and M8130 1x cranksets. - Special MTB gear tooth profile with Dynamic Chain Engagement+ improves chain engagement and retention - Direct Mount Type: Direct Mount Shimano - Tooth Count: 28T, 30T, 36T - Drivetrain Speeds: 12 - Defined Color: Black - Ring Position/Type: Chain-Retaining Single Ring - Round or Oval: Round - Chainline/Hub Compatibility: 141/148 Boost Hubs , 157 Super Boost Hubs

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

Replace worn out chainrings or change out gearing with SRAM's RED X-Glide Chainrings. These solid rings are crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM RED 22 compact crank, these are the rings for you.

SRAM's Red road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped and pinned for precision shifting, too.

SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.

Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chain - Material: Steel

Make SRAM 1x even better with the simplicity of the SRAM X-SYNC Direct Mount chainring. Engineered in Germany, the new Direct Mount rings brings lighter weight and greater simplicity to XX1, X01, X1-1400, and GX-1400 cranksets. SRAM’s Direct Mount rings give riders the perfect opportunity for a serious upgrade. - Fully CNC AL rings - X-SYNC technology - Lighter weight than spider version (~25-50g depending on size) - Offset: 0mm (BB30), 6mm (GXP)

Top quality design and materials in sizes to fit modern road and 'cross bikes. - 7000 series aluminum provides strength and durability - 52t for use with 36 or 38t - 50t for use with 34t

Origin-8's Alloy Blade Chainrings are CNC-machined out of tough, light and durable 6061-T6 aluminum and are compatible with 8- and 9-speed drivetrain components. They have an attractive and corrosion-resistant silver anodized finish.

Origin-8's Alloy Non-Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They feature an attractive and corrosion-resistant black anodized finish.