Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Lazer Sport ATS LED Taillight
$11.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions. The ATS LED Taillight only fits Lazer helmets equipped with the Advanced Turnfit System. - COMPATIBILITY: Bullet 2.0, Century MIPS, Century, Wasp Air Tri, Victor, Impala MIPS, Impala, Urbanize MIPS - BATTERY TYPE: LR41 button battery - RUN TIME: 37 hours - LUMENS: 4 lumens - ATTACHMENT: ATS dial - WEIGHT: 15g - MATERIAL: Nylon
Lazer Sport Aeroshell—Blade
$19.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: Blade+ MIPS, Blade+, Blade, Blade MIPS - ATTACHMENT: Blade or Blade+ helmet - WEIGHT: 45g - MATERIAL: Polycarbonate
Lazer Sport Aeroshell—G1
$24.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: G1 MIPS, G1 - ATTACHMENT: G1 helmet - WEIGHT: 45g - MATERIAL: Polycarbonate
Lazer Sport Aeroshell—Sphere
$22.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm
Lazer Sport Aeroshell—Strada
$22.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
Lazer Sport Aeroshell—Z1
$24.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: Z1 MIPS, Z1 - ATTACHMENT: Z1 helmet - WEIGHT: 45g - MATERIAL: Polycarbonate
Lazer Sport BOB Padset
$6.00
Replacement Pads for Lazer's BOB Helmet
Lazer Sport Bullet 2.0 Airslide Front Cap
$17.99 - $24.99
A user adjutable cap for the Bullet 2.0 in order to provide airflow or maximize aerodynamics. - COMPATIBILITY: Bullet 2.0 - ATTACHMENT: Bullet 2.0 helmet - WEIGHT: 34g - MATERIAL: Polycarbonate
Lazer Sport Bullet 2.0 Closed Front Cap
$17.99
A closed cap for the Bullet 2.0 in order to block airflow and maximize aerodynamics. - COMPATIBILITY: Bullet 2.0 - ATTACHMENT: Bullet vent - WEIGHT: 21g - MATERIAL: Polycarbonate
Lazer Sport Bullet 2.0 Venturi Cap
$17.99
Venturi technology accelerates the airflow through the helmet. By creating an active air draw at the rear of the helmet, the Venturi cap increases airflow through the Lazer Bullet 2.0. - COMPATIBILITY: Bullet 2.0 - ATTACHMENT: Bullet 2.0 helmet - WEIGHT: 21g - MATERIAL: Polycarbonate
Lazer Sport Bullet Pad Set
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads. - COMPATIBILITY: Bullet, Bullet 2.0 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Cameleon Rechargeable LED Taillight
$24.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions. - COMPATIBILITY: Cameleon MIPS - RECHARGE TIME: 2 hours - RUN TIME: 24 hours - LUMENS: 5.2 lumens - ATTACHMENT: Rear vent - WEIGHT: 19g - MATERIAL: LED light
Lazer Sport Gekko Rechargeable LED Taillight
$24.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions. - COMPATIBILITY: Gekko MIPS, Gekko, Lil'Gekko MIPS, Lil'Gekko - BATTERY TYPE: USB rechargeable - RECHARGE TIME: 2 hours - RUN TIME: 24 hours - LUMENS: 5.2 lumens - ATTACHMENT: Rear vent - WEIGHT: 19g - MATERIAL: LED light
Lazer Sport Impala Visor Screws
$6.99
Screws for Impala visor. - COMPATIBILITY: Impala MIPS, Impala - WEIGHT: 1g - MATERIAL: Aluminum
Lazer Sport Jackal & Impala Camera Mount
$9.99
Camera mount for Jackal and Impala helmets. - COMPATIBILITY: Jackal MIPS, Jackal, Impala MIPS, Impala - ATTACHMENT: Velcro - WEIGHT: 13g - MATERIAL: Nylon
Lazer Sport Padding—Bullet
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads. - COMPATIBILITY: Bullet, Bullet 2.0 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Padding—Cameleon
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Cameleon MIPS helmet. Set includes four pads - front pad, two top side pads and top center pad. - COMPATIBILITY: Cameleon MIPS - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Padding—Coyote
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Coyote and Coyote MIPS helmets. Set includes three pads - One front/top pad and two top side pads. - COMPATIBILITY: Coyote MIPS, Coyote - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Padding—G1
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer G1 and G1 MIPS helmets. This is the standard padset. Set includes four pads - front pad, two top side pads and one top center pad. - COMPATIBILITY: G1 MIPS, G1 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Padding—Impala
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Impala and Impala MIPS helmets. Set includes three pads - One front/top pad and two top side pads. - COMPATIBILITY: Impala MIPS, Impala - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Padding—Jackal
$6.99
Freshen up the interior of your helmet with a new pad set! - Replacement pads for Jackal helmets
Lazer Sport Padding—Jackal
$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Jackal MIPS helmets. Set includes one pad - Front/Top unipad only. - COMPATIBILITY: Jackal MIPS, Jackal - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Padding—Sphere
$6.99
Freshen up the interior of your helmet with a new pad set! - Replacement pads for Sphere helmets - Attachment: Velcro - Material: Foam
Lazer Sport Padding—Urbanize
$9.99
Freshen up the interior of your helmet with a new pad set! Replacement padset for Lazer Urbanize MIPS helmets. Set includes two pads - one front pad and one top center pad COMPATIBILITY - Urbanize MIPS - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam
Lazer Sport Rechargeable LED Taillight
$24.99
A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions This optional taillight can be added to certain models of Lazer helmets and provides additional visibility on the helmet. It fits inside dock within the Century MIPS or Century helmet, or mounts to the Mudcap when used with the Z1 MIPS, Z1, Blade+ MIPS or Blade+ helmets. Note, the Z1 LED Mudcap (PLZ2005660134) or Blade Mudcap (PLZ2167882106) must be used with the corresponding helmet in order to mount this light. No Mudcap is required with the Century series helmets. COMPATIBILITY - Century MIPS - Century - Z1 MIPS - Z1 - Blade+ MIPS - Blade+ - BATTERY TYPE: USB rechargeable - RECHARGE TIME: 1.5 hours - RUN TIME: 27 hours - LUMENS: 4 lumens - ATTACHMENT: Century helmet - WEIGHT: 11g - MATERIAL: LED light
Lazer Sport Strap Divider For Thick Straps
$3.99
Strap divider for thick Lazer helmet straps COMPATIBILITY - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon
Lazer Sport Strap Divider For Thin Straps
$3.99
Strap divider for thin Lazer helmet straps COMPATIBILITY - Bullet 2.0 - G1 MIPS - G1 - Z1 MIPS - Z1 - Century MIPS - Century - Victor - Wasp Air Tri - Impala - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon
Lazer Sport Strap Dividers for Thick Straps
$35.00
Strap dividers for thick Lazer helmet straps COMPATIBILITY - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - MATERIAL: Nylon
Lazer Sport TS+ LED Taillight
$11.99
A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions LED light for Lazer TSPLUS retention system COMPATIBILITY - Tonic MIPS - Tonic - Tardiz2 - Coyote MIPS - Coyote - Chiru MIPS - Next+ - Compact DLX MIPS - Compact DLX - Compact - BATTERY TYPE: CR2032 button battery - RUN TIME: 37 hours - LUMENS: 4 lumens - ATTACHMENT: TS+ mechanism - WEIGHT: 12g - MATERIAL: LED light
Lazer Sport Twist Cap
$17.99
Change ventilation options with a twist! Choose between aerodynamic performance or up to 11% more ventilation with a rotation of the Twistcap. COMPATIBILITY - Century MIPS - Century - ATTACHMENT: magnetic - WEIGHT: 28g - MATERIAL: Nylon
Page 1 of 2 Next page