Accessories/Parts

Some vehicles require extra strap length. Compatible with Saris' Bones bike racks, the Saris Extra Long S-Hook Straps 80" are made of strong nylon with coated hooks that protect your car's finish.

Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).

Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

Saris' Spare Tire Plate is for use with their spare tire racks. Grab the Spare as an extra or replacement part.

Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

Thule One-Key Lock Cylinders fit virtually all Thule rack feet, cargo boxes, bike trays, and accessories to safely secure your valuable bikes and rack components. Also, the Cylinders within each pack are matched so that the same key opens all the locks.

The HUSKE (HUb Standards Keep Evolving) is a universal fork mount that handles the most common fork mount standards of today and tomorrow. Interchangeable plugs fit into an anodized aluminum extrusion (sold separately).

Maximize your kayak carrying ability with The stacker. It can hold up to 4 kayaks stacked on their side taking up the least amount of roof space. - Fold-down steel design with non-scratch outer coating - Quick on/off hardware ensures fast installation and removal - Optimally sized carrier leaves roof space for other Thule accessories - Carries up to 4 kayaks and requires 1 to 2 people to load and unload them - Includes straps to transport 2 kayaks - 1 to 4 carriers per vehicle - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak

- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames

Thule's Thru-Axle Adapter allows you to carry bikes with through-axle front forks on Thule and most other fork-mounted bike carriers.

Take sleek to a new level – the ingenious RidgeLine Towers integrate with flush-mount factory side rails so you can build a real rack that carries more. Strong and versatile, they attach easily and have a sleek design that aligns with your vehicle’s aerodynamic attitude. - Attaches a base rack system to vehicles with flush-mount factory side rails. RidgeClips and crossbars required for a complete system. - Both are sold separately. Use Fit My Vehicle to find the clips and crossbars. - Advanced design is strong and quiet and aligns with aerodynamic vehicle aesthetics - Works with JetStream, CoreBar and RoundBar crossbars - Unique clip design adapts to your rails for a secure, accurate fit - BarBed has 12° of pitch adjustment to optimize tower position and level bars - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Weight: 1.25 lbs - Dimensions: L 5.00” x W 5.25” x H 3.50”

- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - L 15.50" x W 1.00"

If it floats and fits on crossbars, these Crossbar Pads will help protect it. - Goes great with kayak stackers, heavy-duty straps, and strapthang

The Thule UpRide Fatbike Adapter lets you easily transport fat bikes on your UpRide rack. It fits bikes with tires up to 5 inches wide.

Tailor your towers – these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Roll your own way – the SkyLine Towers work with our Landing Pads to create a customizable, mega-versatile, super easy-to-use system that easily handles your unique personality and extensive range of gear. - Complete SkyLine Tower set - Secure and simple – may be the easiest-to-use rack system out there - Fits all styles of Landing Pad (required) - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - BarBed has 12° of pitch adjustment to optimize tower position and level bars on roofs with curved flush rails - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating\ TECHNICAL SPECS - Weight: 1.00 lbs - Dimensions: L 4.50” x W 4.50” x H 3.00”

- Outer pad is constructed of 600D + PVC. A durable denier fabric with herringbone weave and DWR treatment for water repellency - Micro-brushed inner lining protects your tailgate from rub and wear marks - Raised bumpers facing into the truck box seat most frames snugly preventing bikes from coming into contact while shuttling - Raised square pads along the outer tailgate (small pad only) offer the additional security of holding forks in place - When the shuttle gets steep and rowdy, secure frames down with a Velcro-backed webbing loop and strap system - Grommet system offers the ability to lock bikes - Storage pocket - Two sizes - Small - 39.5" x 57" wide with 5 straps, Large - 47” x 61” wide with 6 straps

When your solo ride turns into a weekend expedition with friends, the NV 2.0 Add-On lets you increase the NV 2.0 carrying capacity from two to four bikes in less time than it takes your friends to decide who gets to sit up front. - Adjustable front tire cradle system - Fully integrated cable locks - Trail Doc compatible - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - Premium gloss metallic powder with water transferred logos - Compatible with 2” NV 2.0 - Increases 2” NV 2.0 carrying capacity to 4 bicycles weighing up to 40 - pounds each - Holds wheelbases up to 48” and tires as large as 4.8” - Quick change from 2 to 4 bikes

An adapter for Thule ProRide to enable transport of fatbikes. - A set of replacement wheel holders for the Thule ProRide bike carrier - Fits wheel dimensions 3 – 5 inches to enable transport of fatbikes

No rails? No problem. The versatile BaseLine’s intelligent design and advanced adjust ability help it morph to the shape of your car’s roof for a sleek, secure, load-it-up fit. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - Tri-axial DropHook clip adjustment easily adjusts to a wide range of roof shapes for safe, secure hold - BarBed has 12° of pitch adjustment to optimize tower position and level bars on rounded roofs - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Dimensions: L 5.00” x W 6.00” x H 4.00”

If it floats and fits on crossbars, these Crossbar Pads will help protect it. - Goes great with kayak stackers, heavy-duty straps, and strapthang

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars FORD - Edge Sport 5-dr SUV with Glass Roof 2015 - 2019 - Edge 5-dr SUV with Normal Roof 2015 - 2019 - Edge 5-dr SUV with Glass Roof 2015 - 2019 - Edge Sport 5-dr SUV with Normal Roof 2015 - 2019

- Sold in pairs-combine them with rollers or saddles for a custom set-up - Flexible saddle shape conforms to boat hull for secure full contact cradling - Felt padded cradles protect hulls and are shaped for easy loading - Tool free install to any cross bar - Locks to base with SKS lock Cores for added security (sold separately) - Premium HeavyDuty strap and bow/stern tie down included - Capacity: 1 kayak 80lbs (when used with another pair of saddles or rollers)

Pair of EndCaps for Yakima CoreBar.

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 6 locks, all using the same key

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks Fit cars FORD - Focus 4-dr Sedan with Normal Roof 2012 - 2018

Custom fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Check the Thule Buyer's Guide to find out which fit kit fits your car - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks