Parts & Accessories

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter

Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g

Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.

This lightweight bicycle handlebar and accessory mount adapter allows for the perfect placement of your mirror, bell or light. Lightweight and sleek design prevents your handlebar from becoming too cluttered. - Made from hi-tech resin and aluminum alloy - Lightweight accessory holder for handlebar end - Ideally paired with a bell, light or mirror - Works with both road and MTB bars - Minimalist design that does not clutter your bike

Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.

If you're looking to mount your Lumina and Mako series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. System Compatibility - Lumina Series - Mako Series

Grab a set of Portland Design Works tail light brackets to mount your lights on seat posts and seat stays. - Seat post and seat stay brackets - Rubber shims included for a custom fit - Compatible with all PDW tail lights except Asteroid and Fenderbot

Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.

If you're looking to mount your NiteRider PRO series lights to a GO Action Camera style mounting point, this is the accessory you've been looking for. The mounting point screws into the GO Action Camera style connection for a solid and secure fitment. SYSTEM COMPATIBILITY - PRO Series Not compatible with Lumina Pro lighting systems

- Quick Strap mounts, adjusts or removes in seconds without tools - Fits 25.4-35mm handlebars - Compatible with Blazes, Beamers, 1200 and Super Spot

Mount the Nip light to an e-Bike that has the specialty Pro Max stem for accessories.

- Installs under the seat for a low profile, less cluttered appearance - Easy to install and stays secure in all terrain - Clamps to most two-rail bicycle saddles - Use with Cygolite Hypershot and Hotshot tail lights - Can also be used with GoPro compatible interface - Premium plastic for strong durability - Only weighs 23 grams - Less prone to scratching bikes compared to metal mounts - Tail light secures to mount without removing from saddle rails - Designed, engineered, and assembled in the USA

The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Whether it be your favorite downhill/MX style helmet or explore the versatility of your Lumina head light by mounting it onto an industrial hard hat making it the ultimate work light! System Compatibility - Lumina Series - MiNewt Mini Series - Mako Series

Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.

This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.

Replacement bracket for Pico and Tigermoth lights. - Includes 1 front bracket, 1 rear bracket, and 2 mounting straps

- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"

2nd generation Locktite™ tool-free handlebar bracket mount for Ranger, Expilion, Metro Pro and Plus, Metro, Streak and Pace systems. Compatible with 22 to 32mm diameter handlebars.

Welcome to the future The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights. The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more. - Transmitr remote can simultaneously control up to 7 lights - ANT+ enabled for use with all Transmitr products - Use Transmitr system for wireless on/off, mode selection, and more - Can be used with multiple Flare RT lights for turn signal configuration - Includes CR2032 battery, mount, and quick-start manual

Free up bar space and secure your Supernova lights or most other stem-mounted accessories with our Ritchey Universal Stem Mount. Our unique mount means clutter- and hassle-free mounting of your favorite devices where they're easily viewed and operated. - Compatible with Ritchey C220 and 4-Axis 44 stem faceplates - Forged and machined alloy - Includes extended-length hardware

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible with every PDW tail light except Asteroid and Fenderbot

An innovative cycle computer/action camera center mount, specifically designed for integrated stem/handlebar systems. Various mounting positions for Garmin Edge/Wahoo/Sigma GPS cycle computers and GoPro/Shimano sport cameras, Topeak CubiCubi front lights, WhiteLite HP 500, WhiteLite 800 BT, and other GoPro-mount-compatible devices. - Compatible Devices: Garmin Edge / Wahoo / Sigma GPS bike computer / GoPro action cams and other devices with GoPro mount - Handlebar Compatibility: Shimano Pro Stealth, FSA Plasma, Ritchey WCS Solostream, SCOTT SYNCROS RR1.0 Carbon Aero 420, Most Talon, Canyon H31 & CP series - Material: aluminum / fiberglass composite - Max load: 220g - Weight: 40g (120mm) / 45g (150mm) - Dimensions: 12 x 3.5 x 3cm (120mm) / 15 x 3.5 x 3cm (150mm)

- Replacement mounting straps for Sunlite lights - Choose specific model to fit your light

The NiteLink remote allows the rider to pair and simultaneously power on/off the Lumina Max headlight and Omega EVO 300 taillight wirelessly. - All New design equipped with NiteLink Wireless Technology - Lights sold separately

Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

The Gino Light Mount provides a mounting point for handlebar lights wherever there is an M5 threaded eyelet on your frame. - 6061 Aluminum - 30g - 26.0mm outside diameter - 5mm mounting bolt

- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot

- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal