Lighting

Minimal and mighty! The USB rechargeable Asteroid headlight from Portland Design Works mounts in seconds and shines super brightly with high-quality optics so you can be seen. Ride for up to 24 hours before needing a new charge. - 3 Modes (burn time): Flash (24 hrs), Pulse (5 hrs), Steady (4 hrs) - UV Proof rubber mount  - Double-click lens to turn on/off - Micro USB charge cord included - Weatherproof exterior for all season riding - Weight: 73 g (2.6 oz)

Minimal and mighty! The USB rechargeable Asteroid tail light from Portland Design Works mounts in seconds and shines super brightly with high quality optics so you can be seen. The double-click lens prevents accidental ons and offs. Ride up to 35 hours before needing a charge. Pairs nicely with the Asteroid Headlight - also available as a light set. - 3 Modes (burn time): Flash (35 hrs), Pulse (6.5 hrs), Steady (4.5 hrs) - Weatherproof exterior for all season riding - Micro USB recharging cord included - Weight: 76 g (2.7 oz)

The City Rover is a USB-rechargeable headlight with a powerful lithium-ion battery and a darkness-destroying CREE LED bulb. Its precision reflector provides superior luminous guidance to the front and side for up to 20 hours of ride time. The City Rover will run for an additional 15 minutes in low-power safety mode after the low-battery indicator light comes on. - Additional 15 minutes in low-power safety mode after low-battery indicator light comes on - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Micro USB charging cord included; 5.5-hour charging cycle - 5 Modes (burn time): Steady High 700 Lumens 2 hours, Steady Medium 350 Lumens 4 hours, Steady Low 200 - Lumens 8 hours, Pulse 600 Lumens 16 hours, Daytime Flash 600 Lumens 36 hours

Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)

The Portland Design Works Daybot Tail Light has a CREE LED to power a 100 lumen Daytime Pulse mode for increased visibility on sunny days. Switch from Day Modes to Night Modes to conserve battery power. Hold the power button down for 1 second to turn the light on or off. The Daybot Tail Light has redesigned mount that works with the included seatpost and seatstay brackets. - 2 Day Modes (runtime): Solid - 60 lumens (6 hours), Pulse - 100 lumens (20 hours) - 3 Night Modes (runtime): Solid - 20 lumens (20 hours), Flash - 20 lumens (100 hours), Pulse - 20 lumens (30 hours) - USB rechargeable li-polymer battery - Weatherproof exterior for all season riding - Includes brackets for seatpost and seatstay mounting - Mounts vertically or horizontally - Includes Micro USB recharging cord - Weight: 1.9 oz - Lifetime Warranty

Portland Design Works' Fenderbot Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and precision reflector to notify others of your presence. And, the Fenderbot bolts directly to your fender so it's always on your bike. - Bright red LED and precision reflector - Bolts directly to fender to prevent theft - Weatherproof exterior for all season riding - Weight: 62 g (2.2 oz) - Runs on 2xAAA batteries (included) - Lifetime PDWarranty

The Gravity Tail Light has a built-in accelerometer that detects deceleration or swerving and automatically changes to a super-bright, solid beam to warn following traffic. - Automatic accelerometer brake light function shines 100 lumens bright - 2 Modes (runtime): Solid - 20 lumens (12 hours), Flash - 80 lumens (30 hours) - USB-rechargeable li-polymer battery - Includes brackets for seatpost and seatstay mounting

The PDW USB-rechargeable Io taillight has two super-bright LEDs for a great value, and offers a super-quick charge time of only 2.5 hours. The Io has 3 different modes, steady, flash, and pulse, and is perfect for urban riding. - 3 modes (runtime) Steady (10h) Flash (20h) Pulse (20h) - Seatstay mount included - UV-proof rubber strap bracket for easy on and off included - Includes Micro USB-recharging cord

The PDW Kepler E-Bike Headlight works with any 6V-15V e-bike system, and it comes packed with 350 lumens and a sturdy stainless steel fork mount. The Kepler E-bike Headlight comes equipped with a Bosch-friendly plug pre-installed for quick attachment to any Bosch e-bike system. For other e-bike installations, the Bosch plug can simply be clipped off, and the light functions just the same directly wired up. - Works with 6-15V systems - Mounts to fork crown with steel bracket - Features a cut-off beam to not blind oncoming riders

The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems. - Seatpost or seatstay mounting - 220 degrees of visibility - 25 Lumens - 48" cable length - Remove Bosch plug to work with any 6V-15V e-bike system

The Lars Rover 810 is a USB-rechargeable headlight with a powerful lithium-ion battery and a darkness-destroying CREE LED bulb. Its precision reflector provides superior luminous guidance for up to 10 hours of ride time. The Lars Rover will run for an additional 15 minutes in low-power safety mode after the low-battery indicator light comes on. The rugged alloy construction is weatherproof and strong enough to handle the abuse of an urban commute. - 5 Modes: Steady low (6 hours), Steady medium (3 hours), Steady high (1.5 hours), Fast Flashing (20 hours), Pulse (7 hours) - Li-ion battery, CREE LED, Texas Instruments integrated circuit - Weatherproof exterior for all-season riding - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Micro USB charging cord included; 5.5-hour charging cycle - Includes UV-proof quick on/off handlebar mount

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

This PDW light set consists of the Pathfinder 200 lumen USB-rechargeable headlight and the Io USB-rechargeable taillight. The Pathfinder 200 has a powerful lithium-ion battery and a darkness-destroying CREE LED bulb. The Io has 3 different modes, steady, flash, and pulse, and is perfect for urban riding. - Headlight: 4 Modes: Steady low (4 hours), Steady high (2 hours), Pulse (8 hours), Daytime Flash (25 hours) - Headlight: Vertical Cutoff Beam focuses beam into perfect bike path pattern while shielding the LED to prevent blinding oncoming traffic - Taillight: Mounts vertically or horizontally - Taillight: 3 modes (runtime) Steady (10h) Flash (20h) Pulse (20h)

Portland Design Works' Radbot 1000 Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and a precision reflector to notify others of your presence. And, the Radbot includes mounts for a rack, seatpost, seatstay, and backpack, so you can put it wherever you want. - 1.0 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty

Portland Design Works' Spaceship 3 Headlight/Radbot 500 Taillight Set offers bright LED lights, front and rear, for super nighttime visibility. The Spaceship 3 headlight focuses three brilliant LEDs through a precision lens, illuminating your course ahead. Powered by 2xAA batteries, the Spaceship 3 includes both steady and flashing modes for up to 100 hours of run time. Includes the Mission Control 2.0 mount. The RADBOT 500 is equipped with a blazing 0.5 watt LED and a large precision reflector to provide visibility to your backside. Powered by 2xAAA batteries, the RADBOT has three modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time. It also features an on/off switch that must be depressed for 1.5 seconds to turn the light on and off. This helps prevent the RADBOT from being accidentally turned on when you're transporting it in your pocket or bag off the bike. Spaceship 3: - Three bright white LEDs - Runs on 2xAA batteries (included) for up to 100 hours of run time - 2 Modes: Steady and Flashing   - Weatherproof exterior for all season riding - Includes Mission Control 2.0 mount  - Weight: 91 g (3.2 oz) - Lifetime PDWarranty Radbot 500: - 0.5 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty

The Portland Design Works Stayputnik tail light bracket has a UV-proof rubber strap to securely hold your tail light on nearly any size seat post. - Mounts in seconds and is compatible with every Portland Design Works tail light except Asteroid and Fenderbot. - UV proof rubber strap - Compatible with every PDW tail light except Asteroid and Fenderbot

Grab a set of Portland Design Works tail light brackets to mount your lights on seat posts and seat stays. - Seat post and seat stay brackets - Rubber shims included for a custom fit - Compatible with all PDW tail lights except Asteroid and Fenderbot

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

The Adventure line of NiteRider Headlamps receive a healthy bump-up in lumens this year. Now pumping 320 lumens output on High. Featuring a lightweight yet rugged build quality, the Adventure 320 Pro is a bright, versatile light that delivers reliability through NiteRider’s long history of outdoor digital electronics; so you can continue on through the darkest of nights. Equipped with our Pivot Stick-on Mount, this light easily mounts to most flat smooth surfaces. Meets FL 1 Standard IP67, protected against the effects of immersion in water to depth between 15 cm and 1 meter. - 4 Light Levels plus 1 Night Vision Mode - 4 Safety Flash Modes, including SOS - FL1 Standard IP67, water immersion ok between 15 cm and 1 meter - Removable mount - Adjustable light angle - Lightweight, weighing in at just 70 grams - Convenient USB rechargeable - Low battery indicator WARRANTY - The Adventure 320 Pro is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Headlamp - Internal Li-Po Battery - Pivot Stick-on Mount - USB Charging Cable

To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h

Emax+ 150 is NiteRider's first taillight specifically made for electric bikes. It comes with a power line that's pre-wired for connection to the eBike's battery. Power line cable measures approximately 52" in length. Taillight powers ON with ignition/ power switch. Features six modes-Steady ON and varying flashes-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 150 - 6 Modes - Hardwired, Voltage 6 to 80 Volts DC - Water / Dust Resistant IP64 Rated - Weight: 75 grams - Fits 22mm-34.9mm seat posts - Includes a pre-wired Emax+ 150 Taillight, Seat Post Clamp Mount, Rubber Mounting Shims, and Rack Mount LIGHT MODES 1) Fast Flash 2) Slow Flash 3) Disco Flash 4) Pulse Flash 5) High Steady 6) Low Steady NiteRider recommends this taillight be installed by an authorized e-bike service and repair shop.

Epro 1000 is NiteRider's first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike's battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes-Steady ON and Pulse Flash-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 1000 - 2 Modes - Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts - Water / Dust Resistant IP64 Rated - Weight: 166 grams - Fits 22mm-31.8mm seat posts - Includes a pre-wired Epro 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims LIGHT MODES 1) Steady ON 2) Pulse Flash NiteRider recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Not compatible with 6 Volt systems.

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

The NiteRider Lumina 1200 Boost provides enough light that it can be used in just about all riding conditions, whether it be on the road, on your favorite mountain biking trail, or hand-held in Walk Mode. Specifically designed to meet the needs of riders in all cycling categories, the Lumina 1200 Boost features the Boost Mode light setting. Simply double click the power button, giving you the option to operate your light at maximum light output! And utilizing a CREE LED at 6000k, means you’ll get what most consider to be the best LEDs available on the market today. These high performance LEDs are extremely reliable, with no filament to break or burn out. With the all new custom engineered collimator optics, the Lumina 1200 Boost projects a beam pattern that provides a generous widespread and even beam pattern of 1200 brilliant lumens! The high-strength head light body casing is comprised of lightweight aluminum and Dupont Fiberglass reinforced nylon that is highly durable. The NiteRider Solas 250 uses two powerful LEDs to produce an amazing 250 lumens of light output. It features 4 modes (2 flash / 2 steady) and is USB rechargeable. We’ve implemented what we call “Group Ride Mode” for cyclists who want to stay visible but not distract others in the pack. LUMINA 1200 BOOST - All New Collimator Lens, distributes a generous even widespread beam pattern - Boost Mode, double tap power button to unleash maximum LED output at 1200 lumens! - 5 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Perfect for helmet mounting (Helmet Mount sold separately) - IntelliCharge – Reduce charge time in half! - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. SOLAS 250 - Daylight Visible Flash (DVF) - 250 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - Convenient USB rechargeable - Super bright daytime flash mode - Be Seen by cars = Be Safe - FL1 Standard IP64, dust and water-resistant WARRANTY - The Lumina 1200 Boost and Solas 250 are both backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LUMINA 1200 BOOST - LED Light Head - Internal Li-Ion Battery - Handlebar Clamp Mount (Fits up to 35mm) - USB Charging Cable SOLAS 250 - LED Tail Light - Seatpost Mount - USB Cable

The All New NiteRider Lumina Dual 1800 represents the next evolution of our best-selling Lumina headlight into a dual LED set-up that produces a far-reaching beam pattern with extensive peripheral illumination; making it the ideal choice for any riding situation or terrain. The Dual emits an amazing 1800 lumens while in Boost Mode, making it one of the brightest self-contained bicycle lights available today. Simply double tap the power button to set the light to Boost Mode. When in Boost Mode, the power button will illuminate red and blue to notify the user at a glance. The Dual is also equipped with side lighting to increase your visibility day or night. Tested, meeting an IP64 rating; The Dual 1800 is designed to be used in a variety of riding conditions because of its high resistance to water and dust. Its high-strength Dupont Fiberglass reinforced nylon body casing and aluminum heat sink are engineered for extreme resistance to cracking and abrasion. - All New Collimator Lens, distributes a smooth widespread beam pattern - Side lighting for increased visibility day or night - Long lasting 20 hour runtime at 100 lumens in Walk Mode - 5 Light Levels plus 2 Daylight Flash Modes - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Helmet mountable (Helmet Mount sold separately) - Fast 3 hour charge via the included AC power charging adapter - Low battery indicator - Extend your ride time, 6 hour runtime at 350 lumens in Low Mode - Boost Mode indicator, power button will light up red and blue - Boost Mode, double tap power button to unleash maximum LED output at 1800 lumens! - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Dual 1800 is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - Dual LED Head Light - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - AC Power Charging Adapter

The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB